Grinding Wheels with a depressed center design allow the flange/lock nut to recess within the grinding wheel so that it can be used for various grinding and cutting applications. Depressed center wheels are designed to handle the most severe right angle grinding applications from heavy stock removal to rough blending. More recently, depressed center wheels have been designed to increase the utility of the right angle grinder for cut-off applications. While large right angle grinders in 7" and 9" have been around for many years, small or mini grinders that use 4", 4-1/2" and 5" wheels making this machine, and wheel category, one of the most popular in power tool applications.
A grinding wheel is a wheel composed of an abrasive compound and used for various grinding (abrasive cutting) and abrasive machining operations. Such wheels are used in grinding machines.
The wheels are generally made from a composite material consisting of coarse-particle aggregate pressed and bonded together by a cementing matrix (called the bond in grinding wheel terminology) to form a solid, circular shape. Various profiles and cross sections are available depending on the intended usage for the wheel. They may also be made from a solid steel or aluminium disc with particles bonded to the surface. Today most grinding wheels are artificial composites made with artificial aggregates, but the history of grinding wheels began with natural composite stones, such as those used for millstones.
The manufacture of these wheels is a precise and tightly controlled process, due not only to the inherent safety risks of a spinning disc, but also the composition and uniformity required to prevent that disc from exploding due to the high stresses produced on rotation.
Grinding wheels are consumables, although the life span can vary widely depending on the use case, from less than a day to many years. As the wheel cuts, it periodically releases individual grains of abrasive, typically because they grow dull and the increased drag pulls them out of the bond. Fresh grains are exposed in this wear process, which begin the next cycle. The rate of wear in this process is usually very predictable for a given application, and is necessary for good performance.
Cutting disc with MPA EN12413
Advanced grit and bond system
No more time less for machine or disc changing
Free of iron and chlorine
Low vibration and comfortable cutting
High stability for easy and comfortable cutting
optimised for universal application
|Details: 7inch Angle Grinder Polishing Wheel, 1/4" Thickness, 7/8" Depressed Hole, Aluminum Oxide, A24|
|Title: Grinding Wheel|
|Abrasive Material: Aluminum Oxide|
|Wheel Type: Grinding,Polishing|
Application: Stainless steel,SS tube ,SS pipe ,alloy steel,inox,aluminum,general metal usage and stone.
Arbor Size: 7/8"
Max. RPM: 8500
About the product information
1.Can we use our own logo or design?
Yes,,you can ,but we have MOQ.You can contact our sales executive .Please send an email to her / him more details about the logo,sticker,packaging ect.More inforation you provide ,more service you can get.
2.Can we have the sample for test before the order?
Yes ,we can send you free sample,but you should pay the freight by air.
3.My trial order is not in large quantity,can you provide it?
Yes,we accept every order from you and your esteemed company.